Mounting the Aggresor A11 is simple. A metal mounting bracket is included to attach the power unit to a wall. Using the included screws the vacuum power unit's mounting plate can be attached directly to a stud on a sheetrock wall. Use optional plastic or metal anchors if the unit needs to be mounted to a masonry wall. The power unit slides into the cleats of the mounting bracket for a snug and secure fit that also allows for easy removal should it be needed. The Aggresor A11 measure 38.5" tall with the collection bin attached and closed.
The vacuum body is 14" in diameter with a slight taper at the top and 16" across in the center where the handles are located on each side. You should allow a minimum 12" of space from the ceiling above the unit for proper cooling. A 12" space is also recommended on each side of the unit to allow easy connection to the tube system using large radius elbows and to also provide space for easy collection bin removal. A minimum 28" of space is recommended below the power unit so the collection can be dropped down for removal. The intake port is 7.75" from the wall to center and 23" from the top of the unit.
The exhaust port is 8" from the top on the right side of the power unit and is connected with an elbow that allows rotation up or down. As with all central vacuums the AGG-A11 should be mounted in an easily accessible area which is not confined and/or heat producing, such as an attic. The universal 24V low-volt inlet signal system works with all brands of inlets and all brands of attachment sets. Both intake and exhaust connections are for standard 2" vacuum tube.
Each AGG-A11 power unit includes:
|
 |
The Aggresor A11 CVS power unit and Ametek-Lamb motor are provided by Electrolux Home Care Products, North America (EHCPNA) from the Juarez production facility. Vacuum warranty service and non-warranty service can be obtained through any Authorized Eureka vacuum dealer or directly through the Vacdepot Inc. service center.
|
|
A Vacdepot Original Product Review. ©2011 Vacdepot Inc.