The Aggresor Select attachment kit sets a the standard for value in central vacuum tool sets. With quality, features and performance that was once only available in attachment sets that sell for much more, Aggresor vacuums offer an exceptional value. With an impressive feature set including a geared belt drive electric brush, 35 foot long wide diameter hi-flo suction hose with full swivel grip, telescopic extension wand with integrated power and a full compliment of above-floor tools and hard floor brush. Aggresor CV attachment sets are well advanced of other tools sets too, with a double quick disconnect wand, brush drive monitor circuit and new LED headlights that often will last for decades of vacuum system use. Aggresor's CV attachment sets provide excellent cleaning on all floor surfaces and above floor with all of the tools used in everyday cleaning of a busy home.
All Aggresor central vacuum attachment sets and power units are manufactured in North America by Electrolux Home Care. The Aggresor powerbrush was first released as the BEAM Solaire, later as the Eureka brand and then Honeywell Select and Elite, which are also owned by Electrolux. The most widely sold powerbrush platform from Electrolux the Select power nozzle is full 13.5" width cleaning with a heavy duty base and neck.
A geared belt provides a positive transfer of power from motor to brush for superior brushing and grooming action of carpeted floors. The Select powerbrush is auto adjusting and accommodates all levels and depths of carpeting with ease. The low profile 2.75" height Select powerbrush features a non-marring soft over mold bumper and rubber coated wheel set to protect furniture and baseboards along with allowing efficient use of the powerbrush on hard floors without scratching. The full power 120V brush motor provides aggressive agitation and the center mounted intake throat provides quick transfer of soil and debris from floor into the vacuum system.
The narrow geared belt design provides many times the strength and life span of a wide rubber belt and also allows for great edge cleaning on both sides. The Select powerbrush features belt-motor protection with a auto resting circuit that stops the motor if a large object, such as a sock or corner of an area rug, is pulled into the nozzle and binds the brush roller. An LED light on the rear of the nozzle signals normal operation with a green LED light and trouble with a red LED light.
Long life shock resistant LED lights are also used under the headlight lens to illuminate the cleaning path. The full motion wand connection is commercial quality in it's strength and features a large step-on wand release, the coveted quick disconnect feature that allows the use to switch floor tools without removing the wand.
The new wand is a design used in many of the better Electrolux built products and provides one of the most advanced connection system used in central vacuum attachment kits. Along with quick disconnection at both ends that allows push button attachment and removal the new wand is also telescopic with 5 positions and extends from its compact form - great for storage or cleaning nearby areas such as stairs - to the full length of two standard wands. The new Electrolux built wand used on the Aggresor attachment set is also fully integrated with all power wiring concealed within it's sleek design. No more floppy cords hanging off the back of the wand, nothing to snag on your furniture as you clean around or under tables, chairs or the kitchen cabinets. No cords, no plugs and no wires to deal with - ever.
Electrolux continued their new connection system through the powered nozzle, up the new integrated telescopic wand and into the new hose handle code named: SUMO. The new Aggresor hose grip includes features you expect; easy to hold, full 360° swivel connection to the hose body and a 3-position thumb operated switch that allows control of the power brush and power unit independently. The new design of the SUMO is a style that integrates these features with the new easy-to-connect wand system with a simple keyed type connection that lines up the hose, wand and tools each time without guessing which part is front or back. The handle also features a soft inlaid grip that help you to hold the handle with less effort while you vacuum. The full wrap gas-pump style grip with finger contours means you exert less effort using the SUMO grip system. The large buttons for tool release and wand extension allow everyone, even someone with less hand strength easily manipulate the Aggresor CV attachment set.
The Aggresor hose-body is a 35 foot in length, 1-3/8" diameter premium crush proof hose stock manufactured by the worlds largest OEM vacuum hose manufacturer for Electrolux. The crush proof hose is lightweight, strong, durable and still exceptionally flexible. Combining strength and flexibility, two qualities often at odd's with each other, is achieved through chemistry and blending of proprietary formulas of plastic and unique manufacturing methods that result in a new electric hose design with qualities that were not possible just a few years ago. The wall end of the hose that plugs into your vacuums wall inlet is available in both Universal or Direct connection type to fit most every inlet used in central vacuums today. Select your hose end configuration at order using the option selector at the top of this page (just above the add-to-cart button).
A common option for a CVS hose wall-end is the Universal Connect configuration which features an 8 foot power cord attached to the wall end that is connected to an standard electrical outlet and provides power down the hose for the electric power brush. The other powered hose style available is the Direct Connect hose end which has two forward facing prongs (or pins..) that plug directly into the inlet, which is powered. If your wall inlets have high voltage built-in, also called a "Super-Valve" or "Powered Inlet", you should use the Direct Connect hose option. If you have standard inlets you should choose a Universal Connect hose option. More information about hoses and inlets is available in the article Central Vacuum Hoses & Inlets Explained - just check the related articles tab above for a link to the article.
The Aggresor above floor attachment set includes the most commonly used tools that can be connected to the end of the hose grip or at the end of the wand for extended reach cleaning. The tool set is a compact design the are easy to carry with you so they are ready to use when you need them and easy to store thanks to their smaller size. The compact crevice tool is used to focus the airflow in a flat point to reach tight spots or corners.
The upholstery nozzle will spread the suction out over the bottom of the tool so airflow can be applied to a larger area without sealing off against the object being cleaned. The Upholstery Nozzle also has thread collectors on the bottom that will lift lint and hair from upholstery or carpeted surfaces. The dusting tool uses a soft natural fill bristle that works with the airflow to release dust from the surface and pull it to the collection bin.
A round tool adapter is also included that allows you to use standard 1.25" round connection cleaning tools with the Honeywell attachment set including aftermarket application specific tools like ceiling fan cleaners, dry mop nozzles and mini blind tools.
Quick hard floor cleaning can be accomplished using the powerbrush with the roller brush switched off. Detailed or large area hard floor cleaning is made easier with the 14" wide natural fill hard floor brush. The full width hard floor brush features a notched row of bristle front and back that allows dirt and debris to enter the airflow area under the tool. The wide nozzle is supported with two outboard wheels and the full swivel neck lets you turn the nozzle while cleaning, driving the floor tool around and under objects and furniture on the floor. Perfect for hard floor covers of all types including wood, stone or synthetic.
The Aggresor Select attachment sets are universally compatible with most central vacuum systems and inlets in use today.
The 1.5" wall inlet is the predominate style in use for the last 30+ years in US homes. This includes systems from BEAM, Aggresor, Hoover, Airvac (M&S Systems), Vacumaid (Astro-Vac, Valet, Vacumaid, Imperium), Filtex, Fasco, Honeywell, Electrolux and many others. Some brands, particularly older installations, use proprietary inlet sizes. The most often installed proprietary inlet types were Kenmore & Budd system that use a 1.25" inlet, Vacuflo inlets with a 4-bolt mount system and older Nutone square style inlets (model 360) installed prior to 1995. Adapters are available for many of these proprietary inlet styles, just call Vacdepot for more information.